Super Quality Household Cleaning Dispenser Plastic Trigger Sprayer
Head Spray-Stream Nozzle
Product Description :
| Super Quality 28/410, 28/400 Cockscomb Plastic Trigger Sprayer for
household kitchen cleaning liquids, hand sanitizer,disinfectant
Liquid,hand wash soup,shampoo, cream,...... | |
| Size | 28/410,28/400,28/415 |
| Structure | Inclined pump body |
| Function | Spray and stream |
| Material | Food grade PP |
| Discharge Rate | 0.9CC-1.0CC |
| Color | White, transparent, blue, red, yellow, orange or customed |
| Grade | Food grade high quality grade |
| Application | household cleaning liquid, hand sanitizer,disinfectant liquid,hand
wash soup,shampoo, cream,...... |
| Package | Plastic Bag+Standard Carton |
| Delivery Time | 10-30days |
More details :
1.Quality Material for Worry-Free Use.Made of quality PP plastic,
the sprayer trigger is worry-free for home office, garden,
bathroom, housekeeping and lawn care use.
2.Standard Size for Easy Use.The sprayer trigger nozzles are
manufactured by standard and precise diameter: 28/400 neck for 8oz
/ 16 oz bottle, easy to install for most normal bottles.
3.Two Sprayer Models. The trigger sprayer with adjustable nozzle
turns easily, letting you switch from mist, stream or to
off,suitable for planting or multi-application use: room cleaning,
beauty treatments, pet liquids, etc.
4.Residental-Grade Trigger.The gardening sprayer trigger is
resitant to most chemicals.
Process analysis of plastic parts :
Structural manufacturability of plastic parts
The size of the sprinkler head is shown in Figure 3. The overall
size is 18mm× 15.3mm. The outside is formed by a cylindrical shape
and to the Angle, and the inside is formed by one
Cylindrical cavity but there are three rectangular reinforcing bars
with a width of 1mm high and 5mm wide, the cosmetic nozzle belongs
to the internal accessories,
Surface accuracy requirements are higher, dimensional accuracy
requirements are also higher.
Manufacturability analysis of plastic parts
(1) The size of the plastic part is small and the surface accuracy
of the plastic part is required to be high, without dents. With a
point gate runner
Single parting cavity injection mold can ensure its surface
accuracy.
(2) The plastic part is produced in small and medium-sized batches,
and the shape of the plastic part is more complex. For processing
and heat treatment, reduce
The plastic part adopts a mold multi-cavity structure, and adopts a
balanced arrangement, in order to facilitate the use of balanced
pouring
System, so as to obtain the correct size, beautiful appearance,
good physical properties of plastic products. So it can be improved
Production efficiency.
Plastic material manufacturability
This cosmetic nozzle is made of ABS injection molding. Check the
relevant manuals.
Acrylonitrile-butadiene-styrene copolymer ABS resin slightly yellow
or white opaque, is acrylonitrile-butadiene
- Styrene copolymer. Acrylonitrile makes the polymer resistant to
oil, heat and chemical corrosion, and butadiene makes the polymer
excellent
The more flexible, toughness; Styrene gives the polymer good
rigidity and processing fluidity. So ABS resin has
Outstanding mechanical properties, high impact strength,
dimensional stability, easy to form, corrosion resistance, heat
resistance, cold resistance and other good
Overall performance. At the same time, it has strong
hygroscopicity, but the raw materials should be dry, and the
dimensional stability of its plastic parts is good
